[Harc] noise signal at 147.250MHz

[Glen G Liscom]

Jaye
With my Yaesu mobile rig connected to a 6 foot vertical on the roof, I'm
hearing a pulsing signal just breaking squelch at 147.215. Meter shows 2 to
3 bars of signal strength. My QTH is near the Moose Lodge in Cutten.

-----Original Message-----
From: Harc <harc-bounces at humboldt-arc.org> On Behalf Of ed--- via Harc
Sent: Monday, May 06, 2019 9:02 PM
To: General <harc at humboldt-arc.org>
Cc: ed at botanical.com
Subject: Re: [Harc] noise signal at 147.250MHz

Jaye,
I checked the vhf transceiver and do not hear anything at 147.250. I also
check it with an SDR receiver and the closest signal I see is a strong
intermittent digital signal at 151.070.
---
ed, kd7nu


At 08:13 PM 5/6/2019, you wrote:

>Greetings all:
>
>I did some work on my shack today and turned the scan on my VHF rig.  I 
>kept hearing noise on 147.250 at over S9--this is the frequency of the 
>Brookings repeater that has been down for some time.  I just confirmed 
>with ka6ulg that he too is getting a pretty strong signal at his QTH.  
>I can't hear it on my HT with a rubber attenuator, but I do hear it on 
>all my external antennas.
>
>Can any one else confirm?
>
>tnx & 73
>j
>
>--
>
>wishing you well
>Jaye, ke6sls--via the toshiba w/thunderchicken
>
>--
>Harc mailing list
>Harc at humboldt-arc.org
>http://mail.humboldt-arc.org/mailman/listinfo/harc_humboldt-arc.org


--
Harc mailing list
Harc at humboldt-arc.org
http://mail.humboldt-arc.org/mailman/listinfo/harc_humboldt-arc.org